Paradox Alarm Repairs Auckland

PARADOX MG & SP ALARM REPAIRS

Does your Paradox Alarm have a red TBL light displayed?

When an alarm trouble condition occurs, the [TBL] button will illuminate on the alarm LED keypads or “Trouble” will appear on the LCD keypad’s display.

Push the [TBL] key to view the Trouble Display. The [TBL] button or [TRBL] indicator will flash and lights corresponding to an existing trouble condition will flash on the LED keypads or the relevant trouble message will appear on the LCD keypad display.

Press the [CLEAR] button to exit the Trouble Display.

When a trouble condition has occurred, press the [TBL] or [TRBL] button to stop the “beeping”. This will stop the beeping, but will not fix the fault.

When you push the TBL button one or more lights will come on illuminating a number corresponding to the trouble the system is experiencing.

To view the faults, press the corresponding key in the main menu.

LED Fault Description Details:

[1] [1] to [32] Zones in Low Battery

[2] Low/No battery on the control panel or AC failure on the control panel

[3] Bell siren trouble

[4] Communication trouble – Fail to communicate on Monitoring Telephone

[5] Tamper and zone wiring failure

[6] Module tamper trouble

[7] Fire loop trouble

[8] Timer Loss

[9] Wireless zone supervision loss

[0] or [10] Module supervision loss

Please call us now on 0800 031 330 to get your PARADOX alarm serviced.

Our Security specialists are all NZ Registered and licensed by the NZ Ministry of Justice and police reviewed, so you know they can be trusted at your property.

FOR A FREE SITE SURVEY AND QUOTE CALL US

Call Us

PARADOX SPECTRA ALARM REPAIRS

Is your PARADOX ALARM false alarming?

TROUBLE DISPLAY:

When a trouble condition occurs, the [TBL] button or [TRBL] indicator will illuminate on the LED keypads or “Trouble” will appear on the LCD keypad’s display.

Press the [TBL] or [TRBL] button to switch to the Trouble Display. The [TBL] button or [TRBL] indicator will flash and lights corresponding to an existing trouble condition will flash on the LED keypads or the relevant trouble message will appear on the LCD keypad display.

Press the [CLEAR] button to exit the Trouble Display.

When a trouble condition has occurred, press the [TBL] or [TRBL] button to stop the “beeping”.

When you push the TBL button one or more lights will come on illuminating a number corresponding to the trouble the system is experiencing.

To view the faults, press the corresponding key in the main menu.

LED Fault Description Details

[1] No/Low Battery Failure

[2] Wireless Transmitter Low Battery

[3] Power Failure Upon power failure, the AC LED on all keypads will turn off.

[4] Bell or PGM2 Disconnected

[5] Maximum Bell Current

[6] Maximum Auxiliary Current

[7] Communicator Report Fail

[8] Timer Loss – Press the [8] key followed by the current time using the 24-hour clock (i.e. 8:30 PM =20:30).

[9] Tamper/Zone Wiring Fail

[10] Telephone Line Monitoring

[STAY] OR [11] Fire Loop Trouble

[FORCE] or [16] Keypad Fault

[BYP] OR [12] Module Loss

[MEM] OR [13] Wireless Transmitter Supervision Loss

Press The [CLEAR ] button to exit.