Is your Micron alarm system causing false activations?
To do the fault analysis in micron alarm system, please go to the keypad and push number 8, 9 and then # on the keypad. This should resolve the issue fully. There can also be other causes for the false activations, if you notice any activation indicating the numbers as below, then your alarm has to be checked by a certified technician.
- Caused by panic
- Battery failure
- Maximum AC current or failure
- Communication failure
- Problem with phone line
- Outdoor /indoor siren failure
If you see any of this happening to your micron alarm, then your alarm needs to be serviced or repaired.
Call us on our 0800031330 for better service or repair your alarm.
Below are the common models of Micron alarm system that we repair and service:
- Micron Traxx, Micron Lynx
- Micron 6 Pac
- Micron Scorpion series Z6, Z9PC, Z6L, Z4120C, Z6020C, Z8020C, Z16040C
- Micron Scorpion Z4110c
- Micron NiteWatch Station
If you have a similar model or brand at your premises but have no knowledge of who installed it or if the alarm system is beeping and needs a repair or servicing, then you can contact us on 0800 031 330
