PARADOX MG and SP SERIES FAULTS
Does your PARADOX Alarm have a red TBL light displayed?
When an alarm trouble condition occurs, the [TBL] button will illuminate on the alarm LED keypads or “Trouble” will appear on the LCD keypad’s display.
Push the [TBL] key to view the Trouble Display. The [TBL] button or [TRBL] indicator will flash and lights corresponding to an
existing trouble condition will flash on the LED keypads or the relevant trouble message will appear on the LCD keypad display.
Press the [CLEAR] button to exit the Trouble Display.
When a trouble condition has occurred, press the [TBL] or [TRBL] button to stop the “beeping”. This will stop the beeping, but will not fix the fault.
When you push the TBL button one or more lights will come on illuminating a number corresponding to the trouble the system is experiencing.
To view the faults, press the corresponding key in the main menu.
LED Fault Description Details:
  to  Zones in Low Battery
 Low/No battery on the control panel or AC failure on the control panel
 Bell siren trouble
 Communication trouble – Fail to communicate on Monitoring Telephone
 Tamper and zone wiring failure
 Module tamper trouble
 Fire loop trouble
 Timer Loss
 Wireless zone supervision loss
 or  Module supervision loss
Please call us now on 0800 031 330 to get your PARADOX alarm serviced.